• ESD Shielding
• Low charging interior and exterior layers
• Integral static dissipative properties, not humidity dependent, won't wear off
• Thermo transfer printing
  Will not flake off or particulate, reducing cross contamination
• Very low NVR and ionics
   Independent lab chemical analysis available
• Proprietary film
• 40% light transmisson; allows for easy identification of bag contents
• Meets ANSI/ESD S541
• Lead-free RoHS compliant - Click for RoHS Compliancy Statement
• To see Statshield Metal In bags being used at a workstation, click here
• Made in America

The bag's material meets the performance specification requirements of ANSI/ESD S541.

Sold in packages of 100 bags packaged in a protective oversized ESD bag

Resistance of outer surface: <10E11 ohms per ANSI/ESD S11.11
Resistance of inner surface: <10E11 ohms per ANSI/ESD S11.11
Thickness: Nominal .0030" (.0762mm) ±10%

Technical Requirements and Guidance
“ESD protective packaging shall be in accordance with the contract, purchase order, drawing or other documentation. When not specified by the above documentation, the organization shall define ESD protective packaging requirements, both inside and outside the EPA per ANSI/ESD S541.”  [ANSI/ESD S20.20-2007 section 8.4]

Per ANSI/ESD S541 section 8.2.1 Material Identification, "ESD protective packaging shall be marked with the ESD Protective Symbol." And section 8.2.3 Traceability "Packaging should be marked with information that allows traceability to the packaging manufacturer and to the manufacturer's date/lot code information. The date/lot code should allow traceability to quality control information pertaining to the manufacture of the specific lot of packaging.

Recommend closings bags with ESD susceptibility labels.
Per EOS/ESD S8 paragragh 3.1 ESD Susceptibility Symbol Application "The Symbol may be incorporated on a sticker used to close or seal ESD protective packaging to indicate that materials inside the package are ESD susceptible."


Use ESD bags to follow ANSI/ESD S20.20 fundamental ESD control principle: "Transportation of ESDS items outside an Electrostatic Protected Area requires enclosure in static protective materials; low charging and static discharge shielding materials are recommended.