• Shields ESD sensitive items from charges and electrostatic discharges (with lid in place)
• Protektive Pak® shipping, handling, and storage containers
• Constructed of impregnated corrugated material for greater durability
• Static dissipative surface resistivity of 10E6 - 10E8 ohms
• Buried shielding layer minimizes the potential of sloughing and rub-off contamination
• Easy assembly without the need for tape, glue, or staples
• Made from 100% recycled material and is 100% recyclable
• Lid Included to shield ESD sensitive contents
• Made in the United States of America

Transportation of sensitive products outside of an EPA shall require packaging that provides:
1. Low charge generation.
2. Dissipative or conductive materials for intimate contact.
3. A structure that provides electrostatic discharge shielding.
(ANSI/ESD S541 section 6.2 Outside an EPA)

"Packaging materials that are in intimate contact with devices should be dissipative." ANSI/ESD S541 section 7.2.2 Resistance of Dissipative Materials

ESD Handbook TR 20.20 paragraph 5.4.3.3.1 Returnable and Reusable Packaging, “In some situations, packaging may be designed for reuse [and] may be reused numerous times. Examples of these types of ESD protective packaging are hinged containers, boxes, and other rigid or semi -rigid containers. The initial cost of these packages may be relatively expensive. However, if the appropriate collection and recycling system is used, the container may be the least expensive choice over time.”

ESD protective packaging shall be marked with the ESD Protective Symbol." "Packaging should be marked with information that allows traceability to the packaging manufacturer and to the manufacturer's date/lot code information. The date/lot code should allow traceability to quality control information pertaining to the manufacture of the specific lot of packaging." (ANSI/ESD S541 section 8.2.1 Material Identification and section 8.2.3 Traceability)